Metal dust exposure and contamination risks in additive manufacturing: A comparison between PBF-EB/M and PBF-LB/M

Authors

DOI:

https://doi.org/10.58134/fh-aachen-rte_2025_001

Keywords:

Additive Manufacturing, Electron Beam, Metal Powder, Contamination, Laser Beam Melting, Powder Bed

Abstract

The technology of powder bed-based melting of metals using electron beams (PBF-EB/M) has great potential in the field of additive manufacturing. Due to specific differences in the process and the process chain, existing findings in the area of occupational safety of the related powder bed-based melting of metals using laser beams (PBF-LB/M) cannot be transferred directly. Various high-risk areas of the PBF-EB/M and PBF-LB/M process chain are evaluated based on experimental studies on worker exposure to metal dust and contaminated surfaces. Both stationary and personal dust measurements were carried out. Wipe samples were used to check for metal powder residues on surfaces along the process chains. Recommendations regarding occupational health and safety were derived from the findings of the investigations.

Downloads

Published

2025-05-16

Issue

Section

Articles

How to Cite

Metal dust exposure and contamination risks in additive manufacturing: A comparison between PBF-EB/M and PBF-LB/M. (2025). RTe Journal. https://doi.org/10.58134/fh-aachen-rte_2025_001

Similar Articles

111-120 of 194

You may also start an advanced similarity search for this article.