3D-Printing on medical textiles – Investigation of adhesion and interpenetration of extruded polymers on knitted PET fabric substrate

Authors

DOI:

https://doi.org/10.58134/fh-aachen-rte_2024_015

Keywords:

additive manufacturing, material extrusion, medical application, interpenetration, composite material, extrusion temperature, polymers, 3D Printing

Abstract

This work investigates the influence of the extrusion temperature used in material extrusion (MEX) additive manufacturing (AM) on the holding strength of parts fabricated onto a synthetic fiber knitted fabric made of polyethylene terephthalate (PET), which was developed for use in textile implants for medical applications. In addition to the adhesion of the extruded filament to the substrate, its ability to create a form-fit bond by interpenetration, i.e. infiltration of the textile, is also investigated. To compare results, the bond between the substrate and extrudate is then examined using a tensile test. As part of this investigation, several series of tests were conducted on samples made from a polylactide (PLA) and two different polyamide 12 (PA 12) filaments. In addition to being able to compare individual test series based on the results and associated extrusion parameters, the results can also be transferred to other polymers and/or filaments.

Downloads

Published

2024-05-17

Issue

Section

Sonderpublikationen

How to Cite

3D-Printing on medical textiles – Investigation of adhesion and interpenetration of extruded polymers on knitted PET fabric substrate. (2024). RTe Journal. https://doi.org/10.58134/fh-aachen-rte_2024_015

Similar Articles

51-60 of 202

You may also start an advanced similarity search for this article.