Additive manufacturing of lattice electrodes for electrocatalyst discovery

Authors

  • Robert Ortmann Ruhr University Bochum image/svg+xml
  • Olga A. Krysiak xemX materials space exploration GmbH
  • Nick Hantke Chair of Hybrid Additive Manufacturing, Ruhr-Universität Bochum, Universitätsstraße 150, 44801 Bochum, Germany
  • Negar Sangtarash xemX materials space exploration GmbH
  • Dr.-Ing. Tobias Grimm Chair of Hybrid Additive Manufacturing, Ruhr-Universität Bochum, Universitätsstraße 150, 44801 Bochum, Germany
  • Dr.-Ing. Jan T. Sehrt Chair of Hybrid Additive Manufacturing, Ruhr-Universität Bochum, Universitätsstraße 150, 44801 Bochum, Germany

DOI:

https://doi.org/10.58134/fh-aachen-rte_2024_014

Keywords:

Additive Manufacturing, Powder Bed Fusion of Metals using a Laser Beam, Lattice, Multi-metal-electrocatalysts, Electrocytalysis, Oxygen Evolution Reaction, Hydrogen Evolution Reaction

Abstract

Large-scale production of green hydrogen and the transition of industrial processes to its use is one of the major challenges of industrial decarbonisation. Due to the use of rare and noble metals in the production of electrocatalysts, large-scale production is often uneconomical and the development of new electrocatalysts inevitable. Since the activity of an electrocatalyst depends on the materials used and the number of active sites, lattice structures and metallic foams as electrode substrates as well as coatings with small particles have proven to be feasible approaches for increasing the output performance. Besides, the replacement of noble metal catalysts with multi-elemental catalysts, for example, high entropy alloys, offers the possibility of providing a variety of different active sites to achieve high material activity at lower cost.

In this study, powder bed fusion of metals using a laser beam is used to manufacture lattice structures of different sizes from NiCr19Fe19Nb5Mo3 (Inconel® Alloy 718). High surface-to-volume ratios are achieved using an exposure strategy specifically adapted to produce lattice structures. Overpotentials for the oxygen and hydrogen evolution reactions of fabricated lattices are determined using a laboratory-scale water electrolyser. Additionally, performance measurements of lattice structures coated with various electrocatalyst materials are performed. The results show a dependency between the overpotential and the geometry and the process parameters used for the additive manufacturing of the uncoated lattice structures. Coated lattices show increased activity depending on the coating material, cavity size and volume.

Downloads

Published

2024-05-17

Issue

Section

Sonderpublikationen

How to Cite

Additive manufacturing of lattice electrodes for electrocatalyst discovery. (2024). RTe Journal. https://doi.org/10.58134/fh-aachen-rte_2024_014

Similar Articles

111-120 of 194

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)