Towards 3D printing with tailored local chemical composition by integrated multi-material Additive Manufacturing

Authors

  • Jonas Boseila RWTH Aachen University, Digital Additive Production (DAP), Aachen, Germany
  • Max Rommerskirchen RWTH Aachen University, Digital Additive Production (DAP), Aachen, Germany
  • Sebastian Bold RWTH Aachen University, Digital Additive Production (DAP), Aachen, Germany
  • Johannes Henrich Schleifenbaum RWTH Aachen University, Digital Additive Production (DAP), Aachen, Germany

DOI:

https://doi.org/10.58134/fh-aachen-rte_2022_002

Keywords:

Integrated additive manufacturing, multi-material, dispenser, printed electronics, integration of functions

Abstract

Anew machine concept combining the Laser Powder Bed Fusion (LPBF)process with a dispensing system to create three-dimensional multi-material AM parts has been developed. Here, we report the combination of stainless-steel parts with locally applied copper coatingsusing a drop-on-demand (DoD) and continuous material deposition of a copper paste.The influence of the process parameters for the deposition, subsequent drying and fusion of the Cu on the film properties was studied. While the combination of Cu structures with stainless steel from LPBF was achieved, further development is still necessary to achieve defect-free films of purecopperas damage to the film occurred during drying and remelting.Thisworkis a first step towards three-dimensional, multi-material parts with discrete, horizontal and vertical interfacesthat are manufactured using a single, integrated machine.

Downloads

Published

2022-09-29 — Updated on 2022-09-29

Issue

Section

Articles

How to Cite

Towards 3D printing with tailored local chemical composition by integrated multi-material Additive Manufacturing. (2022). RTe Journal, 1-15. https://doi.org/10.58134/fh-aachen-rte_2022_002

Similar Articles

71-80 of 200

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)